Solidremote Garage Door Opener Remote Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This solidremote garage door opener remote review focuses on the Visor Type 2 model. It is a black, aftermarket replacement remote designed for specific garage door systems. The device measures 2.99 inches in length, 1.73 inches in width, and 0.63 inches in height. It weighs 2.89 ounces and includes a visor clip. This remote operates on Security+ 315MHz/390MHz and legacy 390MHz frequencies. It uses a pre-installed CR2032 lithium battery. The unit features three buttons to control up to three openers or gates. It is built for compatibility with LiftMaster, Chamberlain, and Sears Craftsman openers made from 1993 onward.
What stands out
- Compatible with Purple, Red/Orange, Yellow, and Green smart/learn buttons on powerheads
- Works with Security+ 315MHz/390MHz and legacy 390MHz systems
- Includes a visor clip and pre-installed CR2032 battery
- Three-button design controls multiple openers or gate operators
- Dimensions are 2.99 x 1.73 x 0.63 inches
Who it fits
Good fit for
You should choose this remote if you own a LiftMaster, Chamberlain, or Sears Craftsman garage door opener from 1993 or later. It fits users who need a replacement for models 139.53753, 139.53681, or 139.53879. The visor clip design is ideal for those who want to mount the remote in their vehicle. It suits users with Security+ 2.0 multi-frequency systems or legacy 390MHz setups. If you need to control three different openers or gates, the three-button layout meets that requirement.
Who should skip it
Skip this product if you have a Genie, Overhead Door, or Linear opener. It does not work with any system that uses DIP switches. The remote is incompatible with older security protocols outside the specified frequency ranges. You should also avoid this if you prefer a keychain style over a visor mount. The listing does not support other opener brands. Ensure your powerhead has one of the specified colored learn buttons before purchasing.
Verdict: This remote is a practical fit for owners of compatible LiftMaster, Chamberlain, and Sears Craftsman openers. It offers straightforward programming and a convenient visor mount.
Solidremote Garage Remote Key Specs
Color: Black
The remote casing is black. This is a neutral color that blends with most car interiors and garage walls. You do not need to worry about it standing out visually. It matches the standard aesthetic of most modern garage door openers and vehicle visors. This allows you to keep your car’s interior looking clean and uniform without a bright or mismatched device hanging from your mirror.
Model: L-VISOR-2
This identifier confirms the specific style of the remote. The L-VISOR-2 designation indicates it includes a clip designed to attach to your sun visor. This placement keeps the remote within easy reach while driving. It also prevents the remote from rolling around in your cup holder or getting lost under seats. This specific model number helps you verify you are purchasing the visor style rather than a keychain version.
Width: 1.73 inches
The remote is 1.73 inches wide. This width is compact enough to fit comfortably in your hand. It is small enough to slide into a pocket if needed. However, it is large enough to provide a secure grip for pressing buttons. This size balances portability with usability. You can handle it easily without fumbling, which is important when you are in a hurry to open your garage door.
Height: 0.63 inches
The remote is 0.63 inches tall. This slim profile ensures it does not obstruct your view when clipped to the visor. It sits flush against the plastic surface. This low height also means it will not catch on clothing or other items when you reach for it. It is thin enough to store in a small compartment or glove box without taking up much space.
Length: 2.99 inches
The remote is 2.99 inches long. This length provides enough surface area to house the buttons and internal components. It is long enough to be easily identified by touch. You can find the buttons without looking directly at the remote. This dimension works well with the visor clip design, allowing the remote to hang securely without tipping over or sliding off the edge of your sun visor.
Design and build quality
According to the listing, the Solidremote Visor Type 2 remote features a black casing. This neutral color helps it blend into most car interiors and garage environments without drawing attention. The device measures 2.99 inches in length, 1.73 inches in width, and 0.63 inches in height. These dimensions make it compact enough to fit comfortably in your hand while remaining slim enough to slide easily into a sun visor slot or pocket. The total weight is 2.89 ounces. This light mass ensures it does not add noticeable bulk to your keychain or visor clip.
The remote includes a visor clip for convenient storage in your vehicle. A CR2032 lithium battery is pre-installed, so you can use it immediately after purchase. The front face houses three buttons. This layout allows you to control up to three different garage door openers, gate operators, or accessories from a single device. The finish appears smooth and functional, designed for everyday handling. You can rely on the physical buttons for direct operation without needing to interact with a smartphone app. The design prioritizes simplicity and reliability for routine garage access.
Setup and everyday use guide
Setting up this Solidremote garage door opener remote is straightforward. The listing notes that a CR2032 lithium battery is pre-installed. You do not need to buy or install a power source before first use. The package includes a visor clip. This allows you to mount the remote directly onto your car’s sun visor. This placement keeps the device within easy reach while driving. It also prevents the remote from getting lost in cup holders or glove compartments. Programming is handled via the opener’s smart learn button. You must locate the purple, red, orange, yellow, or green button on the powerhead of your garage door unit. The remote supports Security+ 315MHz and 390MHz systems. It also works with Security+ 2.0 multi-frequency systems. Legacy 390MHz systems using billion code technology are also supported. You can program up to three garage door openers, gate operators, or accessories. The three-button layout lets you control multiple devices from a single unit. It is compatible with LiftMaster, Chamberlain, and Sears Craftsman openers from 1993 to current. It does not work with DIP switch systems. It is also incompatible with Genie, Overhead Door, or Linear openers. Daily use involves pressing the corresponding button for the door or gate you wish to operate. The compact size fits comfortably in your hand. The black casing remains discreet in your vehicle. The visor clip ensures it stays secure during travel. You simply press the button and wait for the door to respond. The process relies entirely on the signal match between the remote and the opener’s receiver.
Before You Buy This Remote
Before purchasing this solidremote garage opener remote, verify your opener’s compatibility. It works only with 1993-current LiftMaster, Chamberlain, and Sears Craftsman units featuring a purple, red, orange, yellow, or green smart learn button on the powerhead. It is not compatible with DIP switch systems, Genie, Overhead Door, or Linear openers. The remote uses Security+ 315MHz/390MHz and Security+ 2.0 multi-frequency systems. You should check the listing photos to confirm your model matches the supported list, including 1345, 1355, and 3220 series. The device includes a visor clip and a pre-installed CR2032 battery. Maintenance is minimal. You may need to replace the battery after extended use. This remote fits well into a smart home setup that already includes video doorbells and smart locks. It provides basic garage control without complex integration. Ensure your existing security ecosystem handles access logging separately if needed. This product is a simple, physical replacement tool rather than a smart hub. It complements your current security devices by adding reliable manual control for your garage door.
Check before you buy
- Check for purple, red, orange, yellow, or green learn button
- Confirm opener is not Genie, Overhead Door, or Linear
- Verify model is not a DIP switch system
- Ensure opener is 1993 or newer LiftMaster or Craftsman
The product at a glance
Solidremote 3-Button Visor Garage Remote
Best for: LiftMaster and Sears Craftsman opener owners
- Access Method
- Push button
- Doors Controlled
- 3 doors
- Security Technology
- Security+ 2.0, Billion code
- Connectivity
- Security+ 315MHz/390MHz, Legacy 390MHz
- Color
- Black
- Application
- Garage
View on Amazon: Solidremote 3-Button Visor Garage Remote Affiliate link
This Solidremote 2-pack replaces Sears Craftsman remotes for LiftMaster and Chamberlain openers with a purple, red, yellow, or green learn button. The black visor-style unit measures 2.99 by 1.73 by 0.63 inches and weighs 2.89 ounces. It uses a CR2032 battery and includes a visor clip. The three-button design controls up to three devices. It works with Security+ 315MHz and 390MHz systems.
Pros
- Compatible with LiftMaster, Chamberlain, and Sears Craftsman openers featuring a smart learn button
- Three-button remote controls up to three garage doors, gates, or accessories
- Includes a visor clip and pre-installed CR2032 battery
- Works with Security+ 315MHz, 390MHz, and legacy 390MHz systems
Cons
- Incompatible with Genie, Overhead Door, Linear, and DIP switch systems
- Only works with openers from 1993 onwards
- Single-button press controls all three doors rather than individual selection
Good fit if
- You own a LiftMaster, Chamberlain, or Sears Craftsman opener with a colored learn button
- You need a replacement for the 139.53753, 139.53681, or 139.53879 models
- You want a visor-mount remote with a pre-installed battery
Skip if
- You have a Genie, Overhead Door, or Linear garage door opener
- Your opener uses DIP switches instead of a learn button
- You need to control more than three devices with one remote
Verdict: Solidremote Visor Garage Remote 2-Pack is a direct replacement for specific Sears and LiftMaster openers. It fits users who need a simple, visor-mounted control for compatible Security+ systems.
Specifications side by side
| Spec | Solidremote 3-Button Visor Garage Remote |
|---|---|
| Access Method | Push button |
| Doors Controlled | 3 doors |
| Security Technology | Security+ 2.0, Billion code |
| Connectivity | Security+ 315MHz/390MHz, Legacy 390MHz |
| Color | Black |
| Application | Garage |
| Dimensions | 2.99 × 1.73 × 0.63 inches |
| Weight | 2.89 ounces |
| Model | L-VISOR-2 |
Frequently asked questions
Does this remote work with LiftMaster openers?
Yes, it is designed as a direct replacement for specific LiftMaster systems. It fits users who need a simple, visor-mounted control for compatible Security+ systems. This makes it a suitable choice for owners of LiftMaster garage door openers who require a reliable backup or primary remote.
Is it compatible with Sears Craftsman openers?
Yes, the Solidremote Visor Garage Remote 2-Pack serves as a direct replacement for specific Sears Craftsman openers. It is ideal for owners of these brands who need a straightforward control solution. The device is built to integrate seamlessly with compatible Security+ systems found in these units.
What is the physical size of the remote?
The remote measures 2.99 inches in length, 1.73 inches in width, and 0.63 inches in height. These compact dimensions allow it to fit comfortably in most vehicle visors. The small form factor ensures it does not obstruct your view while driving.
How heavy is the Solidremote garage remote?
The device weighs 2.89 ounces. This lightweight design ensures it does not add significant bulk to your car visor. You can clip it securely without worrying about it falling off due to weight or vibration while you are driving.
What color is the Solidremote garage remote?
The remote features a black casing. This neutral color helps it blend into most car interiors and garage environments. You do not need to worry about it standing out visually, as it matches the standard aesthetic of most modern vehicles.
Does this remote have three buttons?
Yes, the product is identified as a 3-Button Visor Garage Remote. This configuration allows you to control up to three different garage doors or gates. The three-button layout provides flexibility for households with multiple access points.
Is this remote suitable for garage use only?
The application is listed specifically for garage use. It is designed to mount in your vehicle visor for convenient access to your garage door. While primarily for garages, its compact size makes it easy to carry if you need to operate the door from your car.
What is the model number for this remote?
The model number is L-VISOR-2. This identifier helps you verify that you are purchasing the correct visor-type remote. It distinguishes this specific 2-pack version from other Solidremote products or single-unit versions that may be available.